PNEUMATIC FITTINGS

PNEUMATIC FITTINGS

Push-in fitting, Push-on fittings

Push-in fittings are used in pneumatic piping. The tube fittings comes in a wide variety of models to meet all your needs. The direction of the tube can be changed freely even after installation. Nickel-pated metal body ensures anti-contamination and anti-corrosion.

Available size:

Thread Size: M5, 1/8”, 1/4", 3/8”, 1/2"

Tube Size MM : 2 MM,3 MM, 4 MM,5 MM, 6 MM, 8 MM, 10 MM, 12 MM, 14 MM, 16 MM

Tube Size: Inches 1/8”, ¼”, 3/8”, ½”

Specifications:-

Fluid medium: Air

Max. Operating pressure 10Bar/ 1.0MPa

Vacuum -100kPa

Operating temperature range 0~60 Degree (No freezing)

Surge pressure must be controlled lower than maximum operating pressure.

Showing :
AED 0.00
PHF
Push-in fitting, Push-on fittings Push-in fittings are used in pneumatic piping. The tube fittings...
AED 0.00
PH
Push-in fitting, Push-on fittings Push-in fittings are used in pneumatic piping. The tube fittings...
AED 0.00
PYJ
Push-in fitting, Push-on fittings Push-in fittings are used in pneumatic piping. The tube fittings...
AED 0.00
PLGJ
Push-in fitting, Push-on fittings Push-in fittings are used in pneumatic piping. The tube fittings...
AED 0.00
PIG
Push-in fitting, Push-on fittings Push-in fittings are used in pneumatic piping. The tube fittings...
AED 0.00
POC
Push-in fitting, Push-on fittings Push-in fittings are used in pneumatic piping. The tube fittings...
AED 0.00
PWJ
Push-in fitting, Push-on fittings Push-in fittings are used in pneumatic piping. The tube fittings...
AED 0.00
PD
Push-in fitting, Push-on fittings Push-in fittings are used in pneumatic piping. The tube fittings...
Showing :